Specifications
Quick Specs
Body Style: 2-Dr HatchEngine: 1.6L Inline 4
Transmission: 5 Speed Manual
Drivetrain: Full Time All Wheel Drive
Engine
- Type: Inline 4, turbocharged and intercooled, iron block, aluminum head
- Oil sprayed pistons
- Mechanical timing advance
- Valve train: DOHC, 16 valves
- Displacement: 1597cc
- Bore and Stroke: 78.0 X 83.6 mm
- Compression Ratio: 7.9:1
- Horsepower: 132 @ 6000 rpm
- Torque: 136 hp @ 3000 rpm
Drive train
- Transverse front engine, All wheel drive
- All Open differentials
- Center differential lock allows 50/50 power split between front and rear axles
- Transmission: 5-speed manual
- Gear Ratios:
- 1: 3.31:1
- 2: 1.83:1
- 3: 1.23:1
- 4: 1.07:1
- 5: 0.80:1
- Final drive: 4.11:1
Exterior dimensions
- Curb Weight: 2645 lbs
- Weight Distribt'n. F/R: 61/39
- Wheelbase: 94.5 in
- Track F/R: 55.1 in. / 66.1 in.
- Length: 161.8 in
- Width: 64.8 in
- Height: 54.9 in
Suspension
- Front: McPherson struts, anti-roll bar. Spring Rate: 130 lb-ft
- Rear: Struts with lateral and trailing links. Anti-roll bar. Spring Rate: 90 lb-ft
Brakes
- Front: 10.2 in. vented discs
- Rear: 9.7 in. solid discs
Wheels and Tires
- Stock wheel size: 14 x 5.5 in., ET45
- Stock tires: 185/60/14
- Centerbore: 60mm
- Other wheels known to work
- Personally used: 15x6.5 ET40 (8mm less inner clearance than stock, 18mm further extension than stock).
- ET34 (2mm less, 24mm further) to ET46 (14mm less, 12mm further) should work with a 195 or 205 tire.
- Personally used: 16x7 ET40 (14mm less inner clearance than stock, 24mm further extension than stock).
- ET38 (12mm less, 26mm further) to ET40 should work with a 195 to 205 tire. - Of course, higher offset wheels could be used with spacers (maximum 3mm with stock studs).
- If aftermarket wheels are used that are not hubcentric, centering rings should be used.
- Other tire sizes similar to stock
- 195/50/15 (-0.28% circumference difference)
205/50/15 (+1.45% circumference difference) - 195/45/16 (+0.74% circumference difference)
205/40/16 (-1.25% circumference difference)
Other Technical Measurements
Endlink Measurements Front: 5/8" Rear: 1-1/2" |
Detailed Technical Data from Service Manual
Section 0 | Measurements |
Section 1B | B6T DOHC Engine |
Section 2B | B6T DOHC Lubrication |
Section 3B | B6T DOHC Cooling |
Section 4B | B6T DOHC Fuel and Emissions |
Section 5 | B6T & B6 Electrical |
Section 6 | B6T & B6 Clutch |
Section 7a | B6T FWD Transmission |
Section 7c | B6T 4WD Transmission |
Section 8 | B6T 4WD Propellor Shafts |
Section 9 | B6T 4WD Axles |
Section 10 | B6T & B6 Steering |
Section 11 | B6T Brakes |
Section 12 | B6T & B6 Wheels |
Section 13 | B6T Suspension |